Transparent carbon nanotube coatings

Thin networks of carbon nanotubes (CNTs) are sprayed onto glass or plastic substrates in order to obtain conductive transparent coatings. Transparency and conductivity at room temperature of different CNT material are evaluated. CNT coatings maintain their properties under mechanical stress, even after folding the substrate. At a transparency of 90% for visible light we observe a surface resistivity of 1 kΩ/sq which is already a promising value for various applications.     

Activity evaluation of carbon paste electrodes loaded with pt nanoparticles prepared in different radiolytic conditions

Three Pt-based catalysts prepared in different radiolytic conditions and supported on graphite powder were packed into a carbon paste electrode configuration. They were compared to each other, to the commercial (Pt) deposited on activated carbon powder (Johnson Matthey) and to pure Vulcan XC-72 for their respective abilities toward the hydrogen evolution reaction (HER). The Tafel parameters were determined for all these electrodes. From the I–V curves and their quantitative treatment, the following order of activity emerged unambiguously and reads: (PtCO)₂ (fcc structure) > (PtCO)₁ (Chini cluster) > (Pt)_neat > (Pt)_JM (Johnson Matthey) ≫ (Vulcan XC-72). As expected, all the Pt-loaded electrodes were more efficient than Vulcan XC-72. The classification appears to be linked with the mean nanoparticle size, and for comparable sizes, with the surface morphology of the materials. The results and the stability of the electrodes suggest that the small particle sizes and the good dispersity on the carbon support were maintained during the HER.     

Electroanalytical and chromatographic determination of pentachlorophenol and related molecules in a contaminated soil: a real case example

Electroanalytical and chromatographic methodologies have been applied for the determination of pentachlorophenol (PCP) and some of its derivatives in real soil samples contaminated by industrial discharge. The analytes were extracted with hexane from soil samples collected at different points of the site and mixed to produce a representative sample. Square wave voltammetry (SWV) experiments were carried out on either a boron-doped diamond (BDD) electrode or a gold ultramicroelectrode (Au-UME) in an analyte composed by the Britton-Robinson (B-R) buffer at pH 5.5 with the direct addition of proper amounts of the extract. The voltammetric responses revealed an irreversible anodic peak at approximately 0.80 V vs. Ag/AgCl with a peak current showing a linear dependence on PCP concentration. This linear relationship yielded a detection limit (DL) of 2×10⁻⁸ mol l⁻¹ (or 5.5 μg l⁻¹) for the BDD electrode and 6.9×10⁻⁸ mol l⁻¹ (18.4 μg l⁻¹) for the Au-UME, while the independently measured HPLC detection limit was 1.1×10⁻⁸ mol l⁻¹ (3.0 μg l⁻¹). The application of electroanalytical and chromatographic methodologies in the analysis of soil extracts revealed, besides the PCP responses, signals for some related molecules such as o-tetrachlorobenzoquinone (o-chloranil), hexachlorobenzene and tetrachlorophenol. Recovering experiments for PCP showed a concentration of 27.5 mg kg⁻¹ for the electroanalytical determinations and 26.8 mg kg⁻¹ for the HPLC analysis, values exceedingly high if considering that the maximum residue limit established for natural waters by the Brazilian Environmental Agency is 10 μg l⁻¹.     

细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。     

贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

聚中性红膜修饰电极测定痕量NO2^—的研究

研究了聚中性红膜修饰电极对ＮＯ－２的催化氧化性能，建立了测定ＮＯ－２的新方法。ＮＯ－２的浓度在２．０×１０－６～５．０×１０－３ｍｏｌ／Ｌ范围内与催化氧化峰电流呈良好的线性关系，检测限为６．０×１０－７ｍｏｌ／Ｌ。若利用计时电流法分析，检测限可达８．０×１０－８ｍｏｌ／Ｌ。     

Voltammetric sizing of a sphere.

The size of a glass sphere positioned in the center of a microdisk electrode is determined by using a simple electrochemical procedure and is confirmed, additionally, by a microscopical measurement of the sphere at the time of the electrochemical measurement. The cyclic voltammetric response of the naked electrode and of the electrode with the sphere positioned in its center is recorded over a wide range of scan rates (0.002-1.5 V s(-1)). The size of the sphere is then determined by comparison of the experimental voltammogram with simulations for each individual scan rate.     

Characterization of Carbon Film Electrodes for Electroanalysis by Electrochemical Impedance

The interfacial behavior of electrodes fabricated from carbon film resistors of 2 and 20 Ω in supporting electrolyte solutions of varying pH used in electroanalytical experiments has been characterized by electrochemical impedance spectroscopy with complementary cyclic voltammetric experiments. Equivalent circuits are proposed to fit the experimental data and the influence of electrode pretreatment has also been investigated.     

A study on the utility of bismuth-film electrodes for the determination of In(III) in the presence of Pb(II) and Cd(II) by square wave anodic stripping voltammetry

This work is an investigation into the utility of bismuth-film electrodes (BiFEs) for the determination of indium in the presence of cadmium and lead by square wave anodic stripping voltammetry (SWASV). The purpose of this study was to demonstrate that, after judicious choice of the associated chemical and instrumental conditions, it is possible to achieve satisfactory separation of the relevant stripping peak and, thus, to determine simultaneously trace concentrations of cadmium, lead and indium. It was conclusively demonstrated that a BiFE performed better than the equivalent mercury-film electrode (MFE) in this particular application.     

Temporal evolution of Raman intensities on surface-enhanced Raman scattering active copper and gold electrodes at negative potentials

The effect of a roughening procedure on surface-enhanced Raman scattering (SERS) intensity of pyridine at copper and gold electrodes subjected to negative potential has been investigated. Among four procedures tested for a copper electrode the one consisting of electrochemical activation in a solution of LiCl and CuCl₂ resulted in the most stable and effective surface. It was proved that the presence of pyridine during the pretreatment procedure caused a very fast, irreversible decay of SERS intensity for both copper and gold electrodes. Quite stable, at least at room temperatures, gold surfaces were obtained by oxidation-reduction cycles activation in KCl solution.